Polymer pin insulator performance meet the GB/T20142-2006, IEC 61592, silicone rubber is used as raw material, and it is integrally molded by high temperature molding....
Polymer Pin Insulator
Polymer pin insulator performance meet the GB/T20142-2006, IEC 61592, silicone rubber is used as raw material, and it is integrally molded by high temperature molding.
Rated Voltage (kv)
Rated Mechanical Bending Load (kn)
Structure Height H. (mm)
Min. Arc Distance (mm)
Min. Creepage Distance (mm)
Diameter of Shed (mm)
Lightning Impulse Withstand Voltage (peak)(kv)
P.F.1min Wet Withstand Voltage (virtual value)(kv)
Conditions of Use:
1. Ambient temperature -40 °C ~ +40 °C
2. The frequency of the AC power supply does not exceed 100HZ
3. The earthquake intensity does not exceed eight levels.
4. Altitude does not exceed 1500 meters
5. Maximum wind speed does not exceed 35m/s
Polymer Dead End Insulator
Distribution Class Arresters
11kv Dropout Fuse
Disconnecting Switch 11 Kv
High Voltage Isolation Switch
Parallel Groove Clamp
Factory located in southern Zhejiang coastal area, China Electrical Capital- Liushi Town, Yueqing city, which occupied area more than 5000 square meters.
Zhejiang Yuanneng Power Technology Co.,Ltd
Add:Fangdouyan Village, Liushi Town, Yueqing City, Zhejiang Province, China
Copyright © Zhejiang Yuanneng Power Technology Co.,Ltd All Rights Reserved.